Count
Moderator: MADRIX Team
-
acrogenesis
- Posts: 1
- Joined: Tue Apr 05, 2011 11:47 pm
Count
Hello i'm really new to all this and i need some help understanding how to setup the Matrix Generator. I choose the lamp i have "American DJ Mega Pixel Led 28 Channel" but in count what am i supposed to enter? Does it change if I put the bar standing up or just on the floor? Another question i have is how do i setup madrix to control the bars different by these i mean in the "lower" bar lets say i want only blue but in the "top" bar i want red. Up to now i have only been able to do it symmetrically.
Re: Count
Ok, let us split your questions.
.
1. Count
here you have to enter how many fixtures you want to use in x and y.
Just for an example if you have 10 pieces of you fixture right beside each other
a count of 10 in x and a count 1 in y make sense.
If the fixtures are above each other 1 for x and 10 for y make sense.
.
now the Matrix Generator will create the patch for you.
In the seond example you will get a matrix form 8 x 10 pixel because one American DJ Mega Pixel Led 28 channel provide 8 RGB Pixel.
.
2. Different colors on different LED Bars.
The simplest way would be to choose the SCE Colorramp Effect and setup the colors and directions as needed. Just test it.
.
I hope this helps.
.
1. Count
here you have to enter how many fixtures you want to use in x and y.
Just for an example if you have 10 pieces of you fixture right beside each other
a count of 10 in x and a count 1 in y make sense.
If the fixtures are above each other 1 for x and 10 for y make sense.
.
now the Matrix Generator will create the patch for you.
In the seond example you will get a matrix form 8 x 10 pixel because one American DJ Mega Pixel Led 28 channel provide 8 RGB Pixel.
.
2. Different colors on different LED Bars.
The simplest way would be to choose the SCE Colorramp Effect and setup the colors and directions as needed. Just test it.
.
I hope this helps.
LEDs are nothing without control 